PSA340 Crystal Clear MS Polymer/Hybrid Sealant & Adhesive 290ml Cartridge

Our PSA340 Crystal Clear MS Polymer is a 290ml gunnable cartridge of hybrid sealant and adhesive. This is a professional grade sealant that cures using atmospheric moisture, to form a durable rubber seal

Applications

PSA340 Crystal Clear sealant & adhesive is ideally suited for bonding and joint sealing applications where you want the adhesives appearance to be minimised, for instance, when bonding glass and clear or translucent plastics. This product is perfect for connecting joints between or adjoining clear/transparent building materials. It is ideal for use in construction, marine, and automotive applications.

Instructions for use

In order to achieve optimum adhesion, the surface you are applying this sealant to should be cleaned free of grease or dirt. Scuffing or sanding the surface prior to cleaning will also help to ensure a good bond.

Technical information

Cured performance properties

Crystal Clear

Durable Elastic Bond (max movement 25%)

Universal Bonding & Sealing

Inside & outside applications

Paintable with water based paints (this should be tested first)

Fast curing

Free of Isocyanates, phtalat, solvents and silicone

Tack free after curing

UV and weather resistant

Neutral curing, almost odourless

Non corrosive on metals

Absorbs acoustical & mechanical vibrations

Non bubbling and nil shrinkage

Not suitable for continuous under water applications

For further information please refer to the technical data sheet under attachments, at the bottom of the page.

Health & Safety Information

This adhesive may cause skin irritation on sensitive individuals. Unnecessary skin contact should therefore be avoided. If skin contact occurs, wash with a proprietary hand cleaner, followed by washing with soap and water.

In case of eye contact, flush with clean water for at least 15 minutes, and then seek medical attention. When fully cured, the product can be considered non-toxic. Always keep this adhesive away from foodstuffs and food utensils.

Storage information

Store in cool conditions, preferably away from direct sunlight or excessive heat. Shelf life at least 12 months @ 5 – 25C

Not sure if this plastic epoxy is right for you?

If you are not sure if this adhesive is right for your individual requirements please do not hesitate to Contact our friendly sales team and we will be happy to help you.

Do you require a Certificate of Conformance and traceability?

If you require a Certificate of Conformance, please contact us after ordering (either by phone or email) and we will get this sent out to you with your order.