TensorGrip L22 is a 500ML for permanent bonding of materials where immediate bond strength, water resistance and high heat resistance are required.
Versatile
Tensorgrip L22 spray glue is a versatile adhesive that has become increasingly popular in recent years due to its effectiveness and ease of use. This glue is typically used in woodworking and other DIY projects where a strong and reliable bond is needed.
Ease of uses
One of the key advantages of Tensorgrip L22 spray glue is its ease of application. The glue can be applied quickly and easily using a spray nozzle, which allows for even distribution and minimal mess. This makes it a great choice for those who are new to woodworking or who need to complete a project quickly and efficiently.
Suitable for many surfaces
It is suitable for standard laminate, aluminium sheeting, synthetic leather and bonding HPL, hard plastics, GRP, foams and fabrics to a variety of substrates including MDF, chipboard, plywood and many other timber sheet materials. The Tensorgrip L22 can also be used for bonding sheet metals where surface preparation is very important.
This spray adhesive is Low VOC California Compliant.
Forms strong bonds
Another advantage of Tensorgrip L22 spray glue is its strong bonding capabilities. This glue is designed to create a durable and long-lasting bond that can withstand a wide range of environmental conditions, including high humidity and extreme temperatures. This makes it ideal for use in outdoor projects or in areas that are exposed to moisture or heat.
Spray adhesive consistency
This consistency of this contact adhesive is web like.
Spray adhesive uses information
When it comes to this contact adhesive it can be used to bond materials on to the following materials.
- Standard laminate
- Aluminium sheeting
- Synthetic leather
- HPL
- Hard plastics
- GRP
- Foams and fabrics to a variety of substrates including:
MDF
Chipboard
Plywood
Many other timber sheet materials
Woodworking
Bonding laminate, veneer, or edge banding to wood substrates such as MDF, chipboard, or plywood.
Furniture Manufacturing
Attaching laminates or synthetic leather to furniture components like tabletops or cabinet doors.
Automotive Upholstery
Bonding fabrics or foam padding to interior panels or headliners in vehicles.
Marine Industry
Securing materials like GRP (glass-reinforced plastic) or foam to boat interiors or decks.
Construction
Installing wall panels or decorative laminates in commercial or residential buildings.
Signage Production
Mounting aluminium sheeting or acrylic panels onto sign frames or structures.
Model Making
Assembling prototypes or scale models using various materials like plastics, foam, or metal.
Manufacturing
Bonding hard plastics or composite materials in assembly processes for products like electronics or appliances.
Cabinet Making
Joining components such as cabinet sides or shelves in custom cabinetry projects.
Arts and Crafts
Creating mixed-media artworks by bonding different materials like fabric, foam, and wood together for sculptures or installations.
Coverage information for this spray glue
This contact adhesive can cover an area up to 4M2.
Advantages of using L22
Tensorgrip L22 has a number of advantages. Some of these are:
- Fast Drying
- Good Heat Resistance
- Very High Solids
- Non-Chlorinated Adhesive
Save when you buy in bulk
We offer bulk buying options with this sprayable glue. So, the more you buy, the more you save.
Technical information
| Property | Value |
|---|---|
| All the information is based on practical experience and is published in good faith. However, because we have no control over the manner or conditions in which our products are used, or over work undertaken or end product manufactured by the purchaser, we cannot accept liability for results.
Responsibility for ascertaining the suitability of products for your purpose’s rests with the purchaser. All conditions, representations, statements, warranties or guarantees whatsoever, whether express, implied or statutory, in respect of any goods manufactured, sold or supplied by us are hereby expressly excluded and we accept no liability in respect of any claim for damage or consequential loss caused to any property arising directly or indirectly out of the use of our products or goods. |
|
| Viscosity | 350 cps 25°C sp#2 |
| Total Solids | 34% |
| Colour | Clear or Red |
| System Flammability | Flammable adhesive in flammable propellant |
| Shear | > 250 p.s.i. |
| Tensile (180° Peel) | > 25 p.s.i. |
| 90° Peel (6.25 sq.cm) | > 25 p.s.i. |
| Shear adhesion failure temp. (SAFT) 100gram | > 115°C |
| Heat resistance (25mm / 100gram) | 120°C |
| Dry time | 2-3 minutes dependant on temperature & humidity |
| Open time | 30 minutes |
10 reasons to use this Hi Temperature Resistant Web Contact Spray Adhesive
10 reason to use this spray glue include:
- Fast Application – Speed up your production thanks to its rapid application rate
- Airless – Reduce your power usage and save money in the process courtesy of its airless system
- Adjustable Spray Pattern – considering there is no overspray, wastage is reduced dramatically
- Fully Portable – the L22’s portability means it’s incredibly easy to use onsite
- Non-Flammable Adhesive – given that it’s non-flammable, L22 is safer to use and safer to store
- Eco Friendly – once you’re finished with the adhesive, the canister is completely recyclable
- High-Temperature Resistance – L22 can resist temperatures up to 125°C
- Very High Solids – benefit from high yield and coverage of up to 175m2
- Low Maintenance – Don’t waste time cleaning, as L22 is extremely low maintenance, helping to reduce downtime
- Saves Time and Money
Contact canister storage and canister change over instructions
To change over the canister, turn the valve on the canister into the off position, then spray out any remaining adhesive left in the hose.
Next, disconnect the spray hose and gun from the canister.
Reconnect the spray hose to a canister of cleaning solvent (sold separately) and spray out until liquid is clear – which indicates that the hose and gun are clean.
If you choose to leave the hose and spray gun on the canister, leave the valve on the canister open, and do not disconnect the hose & gun from the canister.
Close and lock the spray gun.
Handling & Storage Information
- Consult Material Safety Data Sheet prior to use
- DO NOT store at temperatures over 50°C
- Avoid exposure to direct sunlight
- DO NOT store directly on a concrete floor
- For optimum performance, store at 18°C during use; but, it must always be above 10°C
- When connected, keep the valve open and hose pressurised at all times
- DO NOT close the valve until ready to connect to new cylinder
- Release pressure in hose before disconnection
- Always test product to determine suitability for your particular application prior to use in production
When using L22 spray glue, it’s important to follow the manufacturer’s instructions carefully to ensure a strong and reliable bond. To avoid skin and eye irritation, users should apply the glue in a well-ventilated area while wearing protective gloves and eyewear. It’s also important to allow the glue to dry completely before handling the bonded materials.
How to use this contact spray adhesive
This glue is designed to be applied to two surfaces to be bonded together. Consequently, for best results, the temperature of the adhesive and the surfaces being bonded should be between 60°F – 80°F (16°C – 27°C).
Use with adequate ventilation, and when possible, we recommend shaking the canister well before using.
Attach and secure the hose tightly onto the spray gun with required tip, and attach the other end of the hose onto the canister.
Make sure the hose-valve connections are securely tight, and then open the valve on the canister slowly and fully, checking for leaks during this process. Then once open unlock the trigger on the spray gun to start spraying. It is as simple as that.
Prior to use, please check compatibility by spraying a small test patch of the adhesive on the substrate, and this glue may degrade some substrates.
What is L22 spray glue?
L22 spray glue is a type of adhesive that is designed for use in woodworking and other DIY projects. It is a spray-on adhesive that creates a strong and durable bond between two surfaces.
What surfaces can L22 spray glue be used on?
L22 spray glue can be used on a wide range of surfaces, including wood, metal, plastic, and fabric.
How is L22 spray glue applied?
When using L22 spray glue, users should evenly spray the glue onto one of the materials to be bonded using a spray nozzle, and then firmly press the other material into place.
How long does it take for L22 spray glue to dry?
The drying time for L22 spray glue can vary depending on the temperature and humidity of the environment. Generally, it takes about 30 minutes for the glue to dry completely.
Is L22 spray glue waterproof?
Yes, Tensorgrip L22 spray glue is waterproof and can withstand exposure to moisture without losing its bonding capabilities.
Can L22 spray glue be removed?
Once L22 spray glue has dried, it cannot be easily removed because it is designed to create a permanent bond. However, some solvents may be able to dissolve the glue.
Is L22 spray glue safe to use?
To avoid skin and eye irritation, users must use Tensorgrip L22 spray glue in a well-ventilated area while wearing protective gloves and eyewear. When used according to the manufacturer’s instructions, people generally consider the glue to be safe.
Spraying recommendations
- Make sure that surfaces are clean, dry and free from dirt, dust, oil, loose paint, wax or grease, etc…
- Spray about 10-20 cm (4″ – 8″) away at a 90° angle to the surface, applying a uniform, even coat of adhesive to obtain 80% to 100% coverage of the surface. If necessary, spray another coat of this adhesive in areas that appear to need more adhesive.
- Spray both surfaces to be bonded, one surface vertically and the other surface horizontally
- Allow 2 – 3 minutes for the adhesive to tack off until no adhesive transfers to the knuckle when touched.
- Adhere surfaces and press together with adequate pressure.
- roller is recommended to apply a uniform pressure to achieve maximum strength.
- Allow 24 hours for the adhesive to fully cure.
- If the spray tip clogs, unscrew the spray tip from the gun and clean with solvent such as lacquer thinner or acetone. Do not use a pin on the spray tip orifice
Tensorgrip L22 Overall
Overall, L22 spray glue is a reliable and effective adhesive that is perfect for a variety of DIY projects. Its ease of use, strong bonding capabilities, and versatility make it a popular choice among woodworkers and DIY enthusiasts alike. If you’re looking for a reliable and effective adhesive for your next project, L22 spray glue is definitely worth considering.
Not sure if this spray adhesive is right for you?
If you are not sure if this contact adhesive is right for your individual requirements, please do not hesitate to Contact our friendly sales team and we will be happy to help you.
Do you require a Certificate of Conformance and traceability?
If you require a Certificate of Conformance, please contact us after ordering (either by phone or email) and we will get this sent out to you with your order.
Reviews
There are no reviews yet