LP64 Platinum Mist Spray Contact Adhesive 22 Litre

High-Performance Bonding Solution

Introducing the TensorGrip LP64 Platinum Mist Spray Adhesive, the ultimate solution for your high-surface bonding needs. This spray adhesive is designed specifically for attaching gloss laminates, paperback veneers, and a variety of other decorative surfaces to substrates such as MDF, chipboard, plywood, and additional timber sheet materials.

Lifetime Guaranteed

TensorGrip LP64 is the Lifetime Guaranteed spray contact adhesive for bonding GLOSS decorative surfaces. It’s suitably designed and developed to give a perfect pebble-mist spray pattern. It’s the industry’s winner when it comes to bonding gloss laminates or paperback veneers to a variety of substrates, including MDF, chipboard, plywood, and many other timber sheet materials.

Spray adhesive benefits

This contact adhesive has the following benefits:

• Hi-Performance Neoprene-based Resin System
• Portable System
• Suitable for Post-forming
• Good Heat Resistance

Spray adhesive consistency

The consistency of this contact adhesive is a mist-like spray.

Spray adhesive uses information

This contact adhesive can be used to bond materials onto the following materials.

• High Gloss Laminate
• Paperback Veneer
• Standard Laminate
• Postforming
• Other similar uses

Gloss Laminate Installation

It is ideal for adhering gloss laminates to kitchen countertops and cabinets, providing a sleek and shiny finish.

Furniture Assembly

Perfect for bonding parts of wooden furniture, including bookcases and desks, ensuring a strong hold that lasts.

DIY Home Decor Projects

This glue can be used to attach decorative veneers to home decor items, enhancing the aesthetic appeal of lamps, frames, and wall art.

Flooring Overlays

It is helpful in attaching lightweight flooring overlays, such as veneer sheets, on existing wooden or concrete floors.

Architectural Models

Provides precision and ease in the construction of architectural models, bonding small, detailed pieces with reliability.

Trade Show Exhibits

Essential for quick setups at trade shows, enabling fast and durable assembly of display panels and decorative elements.

Vehicle Interiors

It can be used in automotive projects, particularly for adhering laminates to interior panels of cars and vans.

Shop Fittings

Supports retail setup by affixing materials to shop displays and interior design elements rapidly and efficiently.

Theatrical Sets

An excellent choice for constructing and modifying theatrical sets, where quick, reliable bonding of materials is crucial.

Acoustic Panels

Effective in attaching acoustic panels to walls in studios or home theatres to enhance sound insulation.

These applications highlight the variedness of TensorGrip LP64, making it a suitable choice for a wide range of projects from home DIY to professional installations.

Coverage information for this spray glue

This contact adhesive can cover an area up to 80M².

Advanced Spray Technology

Equipped with a unique pebble-mist spray technology, TensorGrip LP64 ensures a uniform and consistent application, providing a flawless bonding experience without the mess.

The fine mist allows for a smooth layer, ensuring a solid bond that supports your creative and construction projects with precision.

Versatile and Effective

Whether you are working on personal DIY projects or professional installations, our adhesive spray provides unparalleled results.

It’s perfect for a wide range of applications, including home improvements, furniture assembly, and industrial fittings.

Easy to Apply

The TensorGrip LP64 is simple to use. Its spray mechanism allows for quick and effortless application, reducing work time and increasing efficiency.

The adhesive sets rapidly, minimising clamping time and accelerating project completion.

Safe and Sustainable

Formulated with user safety in mind, this adhesive is free from harmful chemicals.

It is designed to be as environmentally friendly as possible. It adheres to stringent safety standards, ensuring that your health and comfort are never compromised.

Technical information

Contact canister storage and canister changeover instructions

Turn the valve on the canister into the off position, spray out the remaining adhesive left in the hose, and disconnect the spray hose and gun from the canister.

Reconnect the spray hose to a canister of cleaning solvent (sold separately) and spray out until the liquid is clear, which indicates that the hose and gun are clean.

If you choose to leave the hose and spray gun on the canister, leave the valve on the canister open. Do not disconnect the hose/gun from the canister.

Close and lock the spray gun.

Handling & Storage Information

• Consult Material Safety Data Sheet prior to use
• DO NOT store at temperatures over 50°C
• Avoid exposure to direct sunlight
• DO NOT store directly on a concrete floor
• For optimum performance, store at 18°C during use; but, it must always be above 10°C
• When connected, keep the valve open and hose pressurised at all times
• DO NOT close the valve until ready to connect to the new cylinder
• Release pressure in hose before disconnection
• Always test product to determine suitability for your particular application prior to use in production

How to use this contact spray adhesive

This glue is designed to be applied to two surfaces to be bonded together. Consequently, for best results, the temperature of the adhesive and the surfaces being bonded should be between 60°F – 80°F (16°C – 27°C).

Use with adequate ventilation, and when possible, we recommend shaking the canister well before using.

Then start spraying. It is as simple as that.

Prior to use, please check compatibility by spraying a small test patch of the adhesive on the substrate. This glue may degrade some substrates.

Spraying recommendations

1. Make sure that surfaces are clean, dry and free from dirt, dust, oil, loose paint, wax or grease, etc…
2. Spray about 10-20 cm (4″ – 8″) away at a 90-degree angle to the surface, applying a uniform, even coat of adhesive to obtain 80% to 100% coverage of the surface. If necessary, spray another coat of this adhesive in areas that appear to need more adhesive.
3. Spray both surfaces to be bonded, one surface vertically and the other surface horizontally
4. Allow 2 – 3 minutes for the adhesive to tack off until no adhesive transfers to the knuckle when touched.
5. Adhere surfaces and press together with adequate pressure.
6. roller is recommended to apply a uniform pressure to achieve maximum strength.
7. Allow 24 hours for the adhesive to cure fully.
8. If the spray tip clogs, unscrew the spray tip from the gun and clean with a solvent such as lacquer thinner or acetone. Do not use a pin on the spray tip orifice

Not sure if this spray adhesive is right for you?

If you are not sure if this contact adhesive is right for your individual requirements, please do not hesitate to Contact our friendly sales team, and we will be happy to help you.

Do you require a Certificate of Conformance and traceability?

If you require a Certificate of Conformance, please contact us after ordering (either by phone or email) and we will get this sent out to you with your order.