What is Cylindrical Stick-on-Feet?

Cylindrical stick on rubber adhesive feet are ideal for use in / as: Furniture protection, Adhesive sticky / stick on feet, POP displays, Glass industry, Domestic appliances, as replacements for laptop feet, Automotive industry, With exhibition displays, Under chair legs, Glass table top bumpers, Glass pads for table tops, Silicone bumpers, Laptop feet, Small glass cushions, Adhesive silicone feet, Silicone protectors, Rubber pads for glass table tops, Non slip / slip resistant coaster pads, Adhesive pads, Self adhesive bumpers, Chopping board feet, and lots of other similar applications.

These stick on feet are sourced from one of the leading global packaging tape manufacturers.

Third Party Video’s of Stick on Feet in use

Please note: These videos are for informational purposes only, and the stick on feet used may be different variations than the ones we directly supply.

Cylindrical Stick on Rubber Feet

Cylindrical Stick on Feet are transparent and ideal for: laptops, Furniture Protection, Stick on feet, Non slip feet for: Electronic and Medical Devices, POP Displays, Glass Industry, Domestic Appliances, Automotive Applications & more

Available in the following sizes:

• 1 Sheet of 350, 10.1mm x 1.8mm
• 1 Sheet of 120, 19mm x 1.9mm
• 1 Sheet of 72, 19.7mm x 3mm
• 1 Sheet of 264, 12mm x 3.2mm
• 1 Sheet of 120, 19mm x 4mm

Bulk buying options available

If you are looking to buy these stick on feet in bulk, every option we have on offer comes with bulk buying options.

Made from Polyurethane

As these: stick-on-feet are made from: Polyurethane, they have several distinct advantages over similar self-adhesive-feet made from other inferior materials. These advantages are:

• Abrasion resistant
• Oil and solvent resistant
• Higher load bearing capacity than conventional rubber
• Higher Tear resistant than rubber – between 500-100 Ibs./linear inch
• Weather resistant
• Excellent noise dampening properties
• Electrical insulating properties
• Heat and cold resistant

Ideal usage

These stick on feet are ideal for teh following types of uses:

• Furniture protection
• Adhesive sticky / stick on feet
• POP displays
• Glass industry
• Domestic appliances
• As replacments for laptop feet
• Automotive industry
• With exhibition displays
• Under chair legs
• Glass table top bumpers
• Glass pads for table tops
• Silicone bumpers
• Laptop feet
• Small glass cushions
• Adhesive silicone feet
• Silicone protectors
• Rubber pads for glass table tops
• Non slip / slip resistant coaster pads
• Adhesive pads
• Self adhesive bumpers
• Chopping board feet
• Similar applications

Application uses for Cylindrical Clear Stick on Feet

Furniture Protection

This stick-on-feet is perfect for furniture protection, due to its sound dampening properties. This stops and buffers as it reduce noise and absorb shock. This means these Eazi Stops can also be be used under glass to prevent the glass slipping when used in conjunction with most glass top furniture.

Stick on feet

Our Cylindrical Eazistops are: self-adhesive-feet, which have a self-adhesive back to allow for them to be stuck onto a range of products without the need to use fixings such as screws or additional glue.

Non slip feet for: Electronic and Medical Devices

These feet can be used as non-slip feet – or spacers – on all manner of: audio, medical, telecoms and general desktop units. This gives you the added advantage of extra heat dissipation when your electronic or medical unit gets hot.

POP Displays

Owing to their clarity, these Eazi Stops can be used under a huge variety of: acrylic counter display units, to help to prevent sliding. When used under coloured displays they will blend nicely with the colour of the unit.

Glass Industry

These Eazi Stops can be used as non-slip spacers under glass to prevent glass from moving; and to take up any shock and vibration. These can also be used on kitchen chopping boards, drinks coasters and glass top furniture in hotels and homes.

Domestic Appliances

These stick on feet can help to stabilize and prevent appliances from slipping or rocking and are ideal for added heat dissipation. Compared to similar products made from commercial grades of rubber these Eazistops will not mark the surface on which it sits as they are made from polyurethane.

Automotive Applications

Ideal for automotive applications as they can be used to prevent squeaks, rattles, noise and vibration within many sectors of the automotive industry.

Load Tolerance

The point of contact provides either a large contact area – or small depending on the shape of the Eazi-Stop Self Adhesive Bumper. This is ideal for: increased load capacity, better wear resistance, increased sound damping, & increased energy absorption.

Alignment

As it helps to make unlevel items more aligned.

Better profile

They allow for better heat dissipation on items such as Laptops, due to allowing for more space under the item, increased load capacity and making it less susceptible to being sheared off substrate.

Applied in small recesses

Although not necessary, these stick-on-feet can be applied in small recesses. This can be beneficial due to it: providing the target area for the Eazi-Stops bumper during attachment process, improves adhesive performance: impact absorption and shear strength, provides neater appearance, and provides uniform location.

Who are Pressure Sensitive Adhesive Solutions?

PSA Solutions Ltd, are: Cylindrical Stick on Feet Suppliers, based in Leicestershire, UK.

We have a large range of: Cylindrical stick on adhesive feet, in our Leicester warehouse, ready to be dispatched – normally – within 2-3 days.

So if you can not see the adhesive you are looking for contact our friendly sales team for free advice.

Where can I find out more about Joint Tape?

To find out even more technical information about polyurethane please see this Wikipedia page.