PSA8550x is a: 19mm x 25 Metres Coroplast Wire Harness Tape. This wire harness tape is designed to keep your wiring together and out of the way.
This tape is ideal for being used in the automotive industry, and has been officially approved for use on the following models: BMW, Changan, Daimler, Fiat, Ford, Vauxhall / Opel, General Motors, Mazda, Nissan, Renault, Volkswagen to name a few.
This tape has numerous benefits. These are that it is:
- Weather flexible
- Abrasion resistant
- Heat resistant
- Flame retardant
- Halogen free
- Tearable by hand
- Solvent free
- Increased sound damping properties
- Compatible with PVC
Tape specification
PET non woven wire harness tape (Manual Applications)
Application uses
This tape is designed as a wire harness and control tape. This makes it ideal to keep wires grouped together.
Carrier Information
The carrier for this tape is a a stitch-bonded PET (non-woven).
Size information
This tape is 25 metres in length and 19mm wide, and 0.45mm thick.
Adhesive information
Then adhesive on this tape is a synthetic rubber.
Not sure if this wire harness tape is right for you?
If you are not sure this cable wrap tape is right for your individual requirements please do not hesitate to contact our friendly sales team and we will be happy to help you.
How to apply this tape
Surfaces must be clean, dry, free from grease and dirt.
We recommended using a cleaning agent such as: Propan-2-ol.{IPA}.
Please note the manufacturer’s safety instructions should be followed and customers are recommended to ensure compatibility of the solvent and their substrate. Ideal bonding substrates are those which are: clean, dry, flat, smooth, dust free and non-porous.
Low temperatures may increase the risk of condensation, reducing the tack of the product. As a result, life expectancy will vary with temperature and humidity.
This tape may be applied by hand direct from a roll applying even pressure.
Technical Information
Figures shown refer to average values only, based on tests carried out in conditioned laboratories.
| Specification | Technical Values |
|---|---|
| Carrier | Stitch-bonded – PET (Non-woven) |
| Adhesive | Synthetic rubber |
| Thickness [mm] | 0.45 |
| Tear strength [N/cm] | 50 |
| Elongation at break [%] | 20 |
| Adhesion to steel [N/cm] | 4.5 |
| Temperature resistance Upper [°C] | 105 |
| Temperature resistance Lower [°C] | -40°C |
Do you require a Certificate of Conformance and traceability?
If you require a Certificate of Conformance, please contact us after ordering (either by phone or email) and we will get this sent out to you with your order.
Reviews
There are no reviews yet