25mm x 33 Metres Filter Tape For 10mm Polycarbonate Sheet

Enhance the longevity and performance of your polycarbonate sheets with our top-quality 33-metre filter tape, specifically designed for 16mm polycarbonate sheets.

This tape offers an optimal blend of protection and durability, ensuring your projects remain in prime condition for years to come.

PSA6000A is a 25mm x 33 Metres Filter Tape For 10mm Polycarbonate Sheet, which is an open pore self-adhesive Anti Dust Breather Tape for Multi Wall Polycarbonate Roof Panels.

This tape is a breathable self-adhesive tape commonly used to seal the ends of multi-wall polycarbonate sheeting, minimising the ingress of dust, debris and insects whilst allowing the escape of moisture vapour.

Application uses

This Grey Spun-bond Filter Tape is a breather membrane tape used to cover the end flutes of a polycarbonate sheet, allowing the sheet to breathe and preventing the build-up of condensation.

Ideal for greenhouses, conservatories, skylights, roofing panels, and any other construction or DIY project that employs 16mm polycarbonate sheets.

Other uses also include:

• Carports
• Conservatories
• DIY projects requiring polycarbonate sheets
• Greenhouses
• Outdoor shelters
• Pergolas
• Roofing panels
• Skylights
• Sunrooms
• Window installations

The Filter Tape For Polycarbonate Sheet has two strips of specialist adhesive that are polycarbonate friendly, running down the outer edges, leaving a non-adhesive area of filter material to cover the exposed flutes.

Prevents condensation from building up

Whether it’s a carport roof or conservatory roof on your building, our Filter Tape For Polycarbonate Sheet, when applied to the edges of your polycarbonate sheet, will prevent condensation build-up and physical debris such as dust from entering the sheet.

Tape construction

This tape has a high-performance adhesive system offering high tack, high adhesion and excellent elevated temperature performance. Therein is an industry-approved adhesive providing UV stability and water resistance. By nature, the fabric surface is water-repellent and possesses excellent breathability over its open surface area.

The material has been manufactured from FDA-approved materials and is suitable for extended skin contact.

Technical Information

Filtration Information

** Results taken from British Board of Agreement Test Report No: 2534

Water Vapour Transmission

Tested to BS 3177: 1959 (1995) mean permeability 4474 (gm24h) **

Thermal shock / condensation

Following MOAT 48: 1991. This test procedure is intended to replicate the ability of the filter tape to resist the passage of water and, therefore, the formation of condensation within the cavities of the polycarbonate under wet / heat cycling conditions.

Resistance to penetration by particulates

Filter cut point 45 microns (rounded up to the nearest 5mic) **

Information guidance

The above information is given in good faith and for guidance only. The user shall be responsible for determining that the performance of the product is sufficient for his application. The quoted values are based on averages and should not be taken as maximum or minimum values for specific purposes.

Health & Safety Guidance

Self-adhesive products are generally considered to be safe and inert.

Health: Under normal conditions of use and handling, no hazards are anticipated, but good hygiene should always be observed. No special protection is required. If skin irritation occurs due to handling, wash affected areas with soap and water and wear protective clothing to avoid future contact.

Composition

Polyester / Polypropylene, Thermoplastic Rubber Adhesive with UV inhibitor. Tissue and Release liner with no hazardous components.

Labelling

No mandatory labelling is required.

Fire Fighting Measures

Fire extinguishing media Foam, dry chemical, or water.

Handling and Storage information

Store at room temperature

Physical and Chemical Properties

• Physical state: Solid
• Stability and Reactivity
• Stability: Stable

Toxicological Information

Not applicable.

Transport Information

No special handling required

Precision Fit

It is tailored precisely for 16mm polycarbonate sheets, ensuring a snug and seamless fit every time.

High-Quality Material

It is manufactured from superior materials that provide excellent resistance against dust, debris, and insects, preserving the clarity and quality of your polycarbonate sheet.

UV Resistant

The tape is designed to endure the harshness of sunlight and prevent UV degradation, ensuring the longevity of the tape and your polycarbonate sheet.

Enhanced Lifespan

By preventing the ingress of moisture and contaminants, the filter tape effectively extends the life of your polycarbonate sheets.

Easy to Apply

Its adhesive backing and flexibility allow for a simple and smooth application process.

Weatherproof

It is designed to withstand varying weather conditions, be it rain, snow, or intense heat, making it ideal for indoor and outdoor applications.

How to apply this tape

Surface preparation is paramount for achieving the required bond when using this pressure-sensitive adhesive. Read our Surface Preparation and Application Guide for more information.

Filter Tape Final Thoughts

Ensure the longevity and pristine quality of your 16mm polycarbonate projects with our 33-metre filter tape. Designed to perfection, this tape is an essential companion for any individual or professional wanting to get the best out of their polycarbonate sheets. Invest in protection and quality today!

Not sure if this filter tape is right for you?

If you are not if this filter tape is right for your individual requirements, please do not hesitate to contact our friendly sales team. We will be happy to help you.

Do you require a Certificate of Conformance and traceability?

If you require a Certificate of Conformance, please contact us after ordering (either by phone or email) and we will get this sent out to you with your order.