TensorGrip® L19 is designed to bond all HPL laminate surfaces and edging materials to MDF, chipboard, and plywood substrates. L19 has undergone extensive testing on FORMICA ColorCore, Magnetic Laminate, Fundamentals, Ligna, and DecoMetal ranges, to name a few, and is now QUIN ASSURED as the premium choice for laminating.
Designed for a variety of industrial and commercial applications
The TensorGrip L19 is a high-quality adhesive spray designed for a variety of industrial and commercial applications. This versatile spray adhesive is suitable for use with a wide range of materials, including foam, fabric, leather, and metal.
Fast acting
One of the key benefits of the TensorGrip L19 is its fast-acting formula, which enables it to create a strong bond quickly and easily. This is particularly useful in time-sensitive applications where speed and efficiency are critical.
High tack
In addition to its fast-acting formula, the TensorGrip L19 is also known for its high tack and excellent bonding strength. It forms a strong, durable bond that can withstand a wide range of environmental conditions, making it suitable for use in both indoor and outdoor applications.
Non-chlorinated spray glue
The TensorGrip L19 also features a non-chlorinated formula, which makes it safer and more environmentally friendly than many other adhesive sprays on the market. It is also non-flammable, which further enhances its safety and ease of use.
Spray adhesive benefits
This contact adhesive has the following benefits:
- 100% resistant to delamination caused by plasticiser migration
- High Temp Resistance – 120°C
- Fast Flash off Time
- Non-Chlorinated Adhesive – making this a healthy adhesive
- BS 6222 Bond Strength Approval by FIRA
- Ultra High Tack
- Formica approved
Spray adhesive consistency
The consistency of this contact adhesive is a fine, consistent web-like spray pattern.
Spray adhesive uses information
TensorGrip L19 is a high-performance spray adhesive specifically formulated for laminate and edging applications, making it a valuable tool for a wide range of industrial and craft purposes.
Consequently, this contact adhesive can be used to bond materials onto the following materials.
- Bonding HPLs (High Pressure Laminates)
- Surfaces and edging materials
- MDF
- Chipboard
- Plywood
- Formica Magnetic laminate
- Formica ColorCore
- Formica Ligna
- Formica Fundamentals
- FRL
- Standard laminate
- Other similar uses
Laminate Countertops
Ideal for adhering plastic laminate to wooden substrates, creating durable and aesthetically pleasing kitchen and bathroom countertops.
Cabinet Veneering
Perfect for applying veneers to cabinetry to achieve a smooth and refined finish, it is instrumental in kitchen and bathroom renovations.
Edge Banding
Used to securely attach edge banding pieces to furniture, enhancing the durability and appearance of exposed edges on materials like plywood and particle board.
Shop Fitting Applications
Essential for installing wall panels, display units, and other permanent fixtures in retail spaces, ensuring a strong bond and a clean look.
Door Manufacturing
Effective for bonding laminates to door surfaces, providing a high-quality finish for interior and exterior doors.
Flooring Overlays
Suitable for adhering new top layers to existing flooring surfaces, particularly in renovation projects where quick fixes are required.
Tabletops
Used in the manufacture or refurbishment of tabletops, where laminates are applied to enhance aesthetics and resistance to wear.
Office Partitions
Aids in the creation and installation of laminated partitions within office environments, offering a combination of privacy and stylish integration.
Automotive Trims
It can be used in the automotive industry to attach interior trims and laminates, providing high strength and resistance to temperature variations.
Marine Interiors
It is ideal for use in boat interiors where laminates are applied to various surfaces, ensuring a bond that can withstand moist and fluctuating weather conditions.
TensorGrip L19’s fast-tack and high-strength properties make it particularly effective in environments where quick application and solid and durable bonds are needed, making it a go-to adhesive in both commercial and high-end craft applications.
Coverage information for this spray glue
This contact adhesive can cover an area up to 80M2.
Technical information
| Property | Value |
|---|---|
| Total Solids | 28%-30% |
| Colour | Clear |
| System Flammability | Flammable adhesive in flammable propellant |
| Shear | > 124°C |
| Dry time | 1-2 minutes dependant on temperature & humidity |
| Open time | 10 minutes |
What materials can the TensorGrip L19 bond?
The TensorGrip L19 can bond a wide range of materials, including foam, fabric, leather, and metal.
How fast does the TensorGrip L19 bond materials?
The TensorGrip L19 features a fast-acting formula that enables it to create a strong bond quickly and easily.
Is the TensorGrip L19 safe to use?
Yes, the TensorGrip L19 features a non-chlorinated formula and is non-flammable, making it safe to use.
What is the shelf life of the TensorGrip L19?
The shelf life of the TensorGrip L19 is approximately 18 months from the date of manufacture when stored in a cool, dry place.
Is the TensorGrip L19 suitable for outdoor use?
Yes, the TensorGrip L19 forms a strong, durable bond that can withstand a wide range of environmental conditions, making it suitable for use in both indoor and outdoor applications.
How do I apply the TensorGrip L19?
The TensorGrip L19 should be applied in a well-ventilated area using a spray gun. Always read the manufacturer’s instructions before use.
How long does the TensorGrip L19 take to dry?
The drying time of the TensorGrip L19 will depend on a variety of factors, including the materials being bonded and the environmental conditions. Generally, it will dry within a few minutes to an hour.
Can the TensorGrip L19 be used on vertical surfaces?
Yes, the TensorGrip L19 can be used on vertical surfaces. However, it is recommended to use a support or clamp to hold the materials in place until the adhesive has fully cured.
Contact canister storage and canister changeover instructions
Turn the valve on the canister into the off position, spray out the remaining adhesive left in the hose, and disconnect the spray hose and gun from the canister.
Reconnect the spray hose to a canister of cleaning solvent (sold separately) and spray out until the liquid is clear, which indicates that the hose and gun are clean.
If you choose to leave the hose and spray gun on the canister, leave the valve on the canister open. Do not disconnect the hose/gun from the canister.
Close and lock the spray gun.
Handling & Storage Information
- Consult Material Safety Data Sheet prior to use
- DO NOT store at temperatures over 50°C
- Avoid exposure to direct sunlight
- DO NOT store directly on a concrete floor
- For optimum performance, store at 18°C during use; but, it must always be above 10°C
- When connected, keep the valve open and hose pressurised at all times
- DO NOT close the valve until ready to connect to the new cylinder
- Release pressure in hose before disconnection
- Always test product to determine suitability for your particular application prior to use in production
How to use this contact spray adhesive
This glue is designed to be applied to two surfaces to be bonded together. Consequently, for best results, the temperature of the adhesive and the surfaces being bonded should be between 60°F – 80°F (16°C – 27°C).
Use with adequate ventilation, and when possible, we recommend shaking the canister well before using.
Then start spraying. It is as simple as that.
Prior to use, please check compatibility by spraying a small test patch of the adhesive on the substrate. This glue may degrade some substrates.
Spraying recommendations
- Make sure that surfaces are clean, dry and free from dirt, dust, oil, loose paint, wax or grease, etc…
- Spray about 10-20 cm (4″ – 8″) away at a 90° angle to the surface, applying a uniform, even coat of adhesive to obtain 80% to 100% coverage of the surface. If necessary, spray another coat of this adhesive in areas that appear to need more adhesive.
- Spray both surfaces to be bonded, one surface vertically and the other surface horizontally
- Allow 2 – 3 minutes for the adhesive to tack off until no adhesive transfers to the knuckle when touched.
- Adhere surfaces and press together with adequate pressure.
- roller is recommended to apply a uniform pressure to achieve maximum strength.
- Allow 24 hours for the adhesive to cure fully.
- If the spray tip clogs, unscrew the spray tip from the gun and clean with a solvent such as lacquer thinner or acetone. Do not use a pin on the spray tip orifice
TensorGrip L19 Spray Adhesive Overall
Overall, the TensorGrip L19 is a reliable and effective adhesive spray that is suitable for a wide range of industrial and commercial applications. Whether you need to bond foam, fabric, leather, or metal, the L19 is an excellent choice that delivers fast results and lasting durability.
Not sure if this spray adhesive is right for you?
If you are not sure if this contact adhesive is right for your individual requirements, please do not hesitate to Contact our friendly sales team. We will be happy to help you.
Do you require a Certificate of Conformance and traceability?
If you require a Certificate of Conformance, please contact us after ordering (either by phone or email) and we will get this sent out to you with your order.
Adrian (verified owner) –
Quick delivery and product was great