Product description
TensorGrip LP61 is suitable for bonding HPL, veneers and almost all other decorative face laminates to a variety of substrates, including MDF, chipboard, plywood and many other timber sheet materials, as well as plastic, aluminium sheeting, and synthetic leathers. This unique formulation is designed for permanent and LIFETIME GUARANTEED bonding of materials where high grab and superior bond strength are required.
Spray adhesive benefits
This contact adhesive has the following benefits:
- CLASS-0 Fire Rating
- Easy application control
- Fast Flash off Time
- Non-Chlorinated Adhesive – making this a healthy adhesive
- High Temp Resistance – 128°C
- Minimal Cleaning
Spray adhesive consistancy
The consistency of this contact adhesive is a delicate, consistent web-like spray pattern.
Spray adhesive uses information
TensorGrip LP61 is a high-performance contact adhesive delivered via a platinum web spray system, typically used for industrial and commercial applications where rapid and robust bonding is necessary.
Consequently, this contact adhesive can be used to bond materials onto the following materials.
- Bonding HPLs (High Pressure Laminates)
- Veneers
- Aluminium sheeting
- Plastics
- Synthetic leathers
- Standard laminates
- FRL’s
- Decorative face laminates to DF, chipboard, plywood and many other timber sheet materials
- Other similar uses
Upholstery Applications
It is ideal for bonding foam and fabrics in the manufacture of furniture, automotive interiors, and marine seating. The spray application allows for quick and even distribution over large surfaces.
Thermal Insulation Attachment
Used to adhere layers of thermal insulation materials to surfaces in HVAC systems, ensuring a tight seal and improved insulation performance.
Automotive Interior Trim
It is essential to attach various trim pieces to vehicles. It works well with headliners, carpeting, and door panels, providing a strong bond that withstands temperature variations and movement.
Marine Applications
Suitable for use in boat construction, including bonding wall and floor panels and upholstering boat seats, due to its high resistance to moisture and water.
Aerospace Fittings
These are utilised in the aerospace industry for lightweight yet strong bonding of interior panels and insulation material, where performance cannot be compromised.
Laminating Decorative Panels
Perfect for adhering laminate sheets to wooden bases in the manufacture of decorative panels for furniture, doors, and partitioning.
Attaching Wall Cladding
They are used to securely fix interior and exterior cladding materials (like decorative stones or composite panels) to walls and frontages.
Flooring Installation
It is effective for bonding various types of flooring materials, including carpet, vinyl, and rubber, especially in commercial and industrial settings.
Assembling Exhibition Stands and Displays
Provides a rapid and durable bonding solution for constructing promotional stands and display units, which are often subject to frequent assembly and disassembly.
General Construction and Carpentry
This product is valid for a range of construction-related applications, including attaching kick plates, mounting wooden fixtures, and other situations where a robust and quick-setting adhesive is beneficial.
TensorGrip LP61’s web spray application allows for expansive and even coverage, making it highly effective for large-scale and complex bonding tasks across diverse industries.
Coverage information for this spray glue
This contact adhesive can cover an area up to 75M2.
Technical information
| Property | Value |
|---|---|
| Viscosity | 350 cps 25°C sp#2, 30r.p.m. |
| Total Solids | 29%-31% |
| Colour | Orange |
| System Flammability | Flammable adhesive in flammable propellant |
| Shear | > 250 p.s.i |
| Tensile (180° Peel) | > 25 p.s.i. |
| Shear adhesion failure temp. (SAFT) 100gram | > 128°C |
| Flash-off time | 1-3mins |
| Heat resistance (25mm/100gram) | 115°C |
| Open time | 40 minutes |
Contact canister storage and canister changeover instructions
Turn the valve on the canister into the off position, spray out the remaining adhesive left in the hose, and disconnect the spray hose and gun from the canister.
Reconnect the spray hose to a canister of cleaning solvent (sold separately) and spray out until the liquid is clear, which indicates that the hose and gun are clean.
If you choose to leave the hose and spray gun on the canister, leave the valve on the canister open. Do not disconnect the hose/gun from the canister.
Close and lock the spray gun.
Handling & Storage Information
- Consult Material Safety Data Sheet prior to use
- DO NOT store at temperatures over 50°C
- Avoid exposure to direct sunlight
- DO NOT store directly on a concrete floor
- For optimum performance, store at 18°C during use; but, it must always be above 10°C
- When connected, keep the valve open and hose pressurised at all times
- DO NOT close the valve until ready to connect to the new cylinder
- Release pressure in hose before disconnection
- Always test the product to determine suitability for your particular application prior to use in production
How to use this contact spray adhesive
This glue is designed to be applied to two surfaces to be bonded together. Consequently, for best results, the temperature of the adhesive and the surfaces being bonded should be between 60°F – 80°F (16°C – 27°C).
Use with adequate ventilation, and when possible, we recommend shaking the canister well before using.
Then start spraying. It is as simple as that.
Prior to use, please check compatibility by spraying a small test patch of the adhesive on the substrate. This glue may degrade some substrates.
Spraying recommendations
- Make sure that surfaces are clean, dry and free from dirt, dust, oil, loose paint, wax or grease, etc…
- Spray about 10-20 cm (4″ – 8″) away at a 90° angle to the surface, applying a uniform, even coat of adhesive to obtain 80% to 100% coverage of the surface. If necessary, spray another coat of this adhesive in areas that appear to need more adhesive.
- Spray both surfaces to be bonded, one surface vertically and the other surface horizontally
- Allow 2 – 3 minutes for the adhesive to tack off until no adhesive transfers to the knuckle when touched.
- Adhere surfaces and press together with adequate pressure.
- roller is recommended to apply a uniform pressure to achieve maximum strength.
- Allow 24 hours for the adhesive to cure fully.
- If the spray tip clogs, unscrew the spray tip from the gun and clean with a solvent such as lacquer thinner or acetone. Do not use a pin on the spray tip orifice
Not sure if this spray adhesive is right for you?
If you are not sure if this contact adhesive is right for your individual requirements, please do not hesitate to Contact our friendly sales team, and we will be happy to help you.
Do you require a Certificate of Conformance and traceability?
If you require a Certificate of Conformance, please contact us after ordering (either by phone or email) and we will get this sent out to you with your order.
Reviews
There are no reviews yet