22L L72 One Way Stick Urethane Spray Adhesive

Introducing the TensorGrip L72 Spray Glue – your ultimate adhesive solution for professional and DIY projects. Whether you’re a crafts enthusiast, a carpenter, or a professional in the manufacturing industry, the TensorGrip L72 Spray Glue is designed to meet your adhesive needs with exceptional performance and ease of use.

Our TensorGrip L72 is a high-performance, plasticiser-resistant adhesive specially formulated for bonding vinyl, rubber and plastics. This one-sided bond adhesive gives faster and greater efficiencies in areas requiring glue to be applied to one surface only due to physical constraints when applying to both sides. It is for use in areas on vinyl and other high-plasticised flooring and fabric applications that are prone to failing.

This adhesive is suitable for rubber, vinyl, and many metals, such as aluminium. It is supplied in a contact sticky pressure pot.

Always test a small sample of the materials first to ensure the product’s suitability for application.

Application uses

TensorGrip® L72 is a versatile one-way stick urethane spray adhesive that offers you a wide range of application possibilities, especially due to its high-performance bonding capabilities for materials like vinyl, rubber, and plastics.

Some of these, for instance, can consist of the following:

1. Attaching foam in upholstery applications
2. Bonding lightweight materials in the production of trade show exhibits
3. Carpet installation in automotive interiors
4. Fabric bonding in the textile industry
5. Foam to wood bonding in furniture manufacturing
6. Installation of insulation panels
7. Joining lightweight decorative panels in the interior design
8. Mounting of acoustic panels
9. Securing thermoformed plastics in packaging applications
10. Upholstering aircraft interiors

Artificial Grass Installation

It is ideal for laying artificial grass on various surfaces due to its strong bond and resistance to environmental factors.

Automotive Upholstery

It is used in the automotive industry to attach vinyl and rubber components to vehicle interiors, including seats, door panels, and dashboards.

Marine Upholstery

Suitable for bonding vinyl and rubber materials used in boats and other marine vessels, offering resistance to water and humidity.

Flooring

Perfect for installing vinyl flooring tiles or sheets, rubber mats, and other types of speciality flooring in both residential and commercial settings.

Wall Coverings

Can be used to apply vinyl wallpapers or wall coverings, providing a durable bond that resists peeling.

Outdoor Furniture

For bonding rubber and plastic components of outdoor furniture, ensuring a weather-resistant hold that withstands various elements.

Roofing Materials

Assists in the installation of rubber roofing materials, offering a secure bond that stands up to weather changes.

Insulation Panels

Effective for attaching rubber or plastic insulation panels in construction projects, enhancing energy efficiency.

Healthcare Equipment

Used in the assembly or repair of rubber and plastic components in healthcare devices, where a strong and safe bond is essential.

Sports Equipment

Ideal for repairing or manufacturing sports equipment made of vinyl, rubber, or plastic, such as mats, protective gear, and more.

These applications highlight the adhesive’s flexibility and effectiveness across various industries, demonstrating its value for projects requiring durable, resistant bonding solutions.

Features

• Bonds vinyl permanently
• Very high-temp resistance – 140°C
• Excellent plasticiser resistance
• Strong one-sided bonds
• Resists weathering, water, fuel, oil and many other plasticisers
• Repositionable dependant on application

High Quality & Versatile Spray Glue

The TensorGrip L72 Spray Glue is a high-quality, versatile adhesive that ensures a strong and durable bond on various materials. This spray glue offers unparalleled bonding strength, from wood and metal to foam, fabric, and plastics. It is ideal for multiple applications such as upholstery, woodworking, laminating, and more.

Fast Tack Formula

One of the key features of the TensorGrip L72 Spray Glue is its innovative fast-tack formula. This formula allows for quick adhesion and reduces the waiting time typically associated with traditional adhesives. With its exceptional tackiness, you can eliminate the need for clamps or lengthy drying periods, saving you time and increasing productivity.

Accurate Coverage & Precision

The TensorGrip L72’s unique spray pattern provides excellent coverage and precision, ensuring an even application without overspray or wastage. Its ergonomic design and easy-to-use trigger mechanism make it effortless to control the flow, allowing for accurate and efficient application even in hard-to-reach areas.

Low Odour and non flammable

Furthermore, the TensorGrip L72 Spray Glue is formulated to be low-odour and non-flammable, providing a safer working environment. This feature is particularly advantageous for indoor projects or areas with limited ventilation, ensuring you can work comfortably without compromising your health or safety.

Canister Evacuation and Render Safe Procedure

Please use the following information when getting rid of an empty canister.

NOTE – Always direct the valve outlet away from the person during the following procedures

Step A. EVACUATION

1. Ascertain from the weight of the canister whether empty of liquid residues
2. If liquid residue remains, invert the canister and open the valve a minimal amount to allow gradual pressure release, leaving it inverted until all pressure is released. Once pressure appears to be released, keeping it inverted, gradually open the valve fully to ensure no blockage has occurred in the valve and ascertain evacuation is complete.
3. If empty of liquid, invert the canister and fully open the valve to release pressure, and ascertain evacuation is complete.
4. Once empty then, proceed to part B to puncture them.

Step B. RENDER SAFE PUNCTURING

1. Check, by feel, whether the canister contains liquid residues. If yes, take additional care to avoid spillage during the following operations.
2. Place evacuated canister in fly press jaws. Base end forward.
3. Close operator protective guard. The wind chisel points down until the canister is fully pierced, then up to release. Remove the canister from the fly press.
4. Alternatively, using a nail punch, puncture the bung on the canister neck (see image below)
5. If the canister contains liquid residues and is still pressurised, pierce the canister twice and then empty it into the appropriate bulk waste liquid container.
6. Disposal via waste recycling provider.

Directions to use

This spray adhesive is designed to be applied primarily on 1 side; however, it can be used on two surfaces to be bonded together. Make sure that surfaces are clean, dry and free from dirt, dust, oil, loose paint, wax or grease, etc. For best results, the temperature of the adhesive and the surfaces being bonded should be between 60°F – 80°F (16°C – 27°C).

Use with adequate ventilation. We recommend shaking the canister well before using it. Attach and secure the hose tightly onto the spray gun with the required tip. Attach the other end of the hose to the canister. Make sure the hose-valve connections are securely tight. Open the valve on the canister slowly and thoroughly, and check for leaks during this process. Unlock the trigger on the spray gun to start spraying.

Before use:

1. 1. Check compatibility by spraying a small test patch of the adhesive on the substrate. This adhesive may degrade some substrates.
   2. Spray about 10-20 cm (4 – 8 inches) away at a 90° angle to the surface, applying a uniform, even coat of adhesive to obtain 80% to 100% surface coverage.
   3. If necessary, spray another coat of glue in areas that need more adhesive.
   4. Spray both surfaces to be bonded, one vertically and the other horizontally.
   5. Allow the adhesive to tack off until no adhesive transfers to the knuckle when touched.

Adhere surfaces and press together with adequate pressure. A roller is recommended to apply uniform pressure to achieve maximum strength. Allow 24 hours for the adhesive to cure fully.

If the spray tip clogs, unscrew the spray tip from the gun and clean it with a solvent such as lacquer thinner or acetone. Do not use a pin on the spray tip orifice.

Handling & Storage Information

Turn the valve on the canister into the off position, spray out the remaining adhesive left in the hose, and disconnect the spray hose and gun from the canister. Reconnect the spray hose to a canister of cleaning solvent (sold separately) and spray out until the liquid is clear, which indicates that the hose and gun are clean. Leave the valve open if you leave the hose and spray gun on the canister.

Do not disconnect the hose/gun from the canister. Close and lock the spray gun.

Please make sure the following is adhered to when storing this adhesive.

1. 1. • Consult Material Safety Data Sheet before use.
      • DO NOT store at temperatures over 50°C.
      • Avoid exposure to direct sunlight.
      • Do Not store directly on a concrete floor.
      • For optimum performance, store at 18°C during use, but must always be above 10°C.
      • When connected, keep the valve open and the hose pressurised at all times.
      • DO NOT close the valve until it is ready to connect to a new cylinder.
      • Release pressure in the hose before disconnection.
      • Always test the product to determine suitability for your particular application prior to use in production.

Special Precautions

For optimum results, store the canister above 18°C during use, but it must always be above 10°C. Allow substrates to acclimatise to normal room temperature (18°C) for 48 hours before bonding. Do not exceed the open time of the adhesive. Keep the canister off cold concrete floors during use.

If adhesive is expelled wet or as a jet, the canister is too cold – move to a warm environment and allow it to thoroughly acclimatise before reusing.

CAUTION

1. 1. • Use only in well-ventilated areas
      • DO NOT thin or reactivate with solvents
      • DO NOT incinerate
      • DO NOT expose to extreme heat over 50°C
      • Keep away from sources of ignition
      • Release pressure before disconnecting hose
      • Test for suitability before use

MSDS and Technical Data Sheets MUST be read and understood before use. Information in this technical literature is accurate and offered in good faith for the consumer’s benefit. The company, however, cannot assume any liability or risk involved in using its chemical products since the conditions of use are beyond our control. Statements concerning the possible use of our products are not intended as recommendations to infringe on any patent.

Technical information

Disclaimer

The technical data contained herein is based on our present knowledge and experience. We cannot be held liable for any errors, inaccuracies, omissions or editorial failings that result from technological changes or research between the date of issue of this document and the date the product is acquired. Before using the product, the user should conduct any necessary tests to ensure the product is suitable for the intended application.

Moreover, all users should contact the product’s seller or manufacturer for additional technical information concerning its use if they think that the information in their possession needs to be clarified in any way, whether for normal use or a specific application of our product. Our guarantee applies within the context of the statutory regulations and provisions in force, current professional standards and following the stipulations set out in our general sales conditions.

The information detailed in the present technical data sheet is given by indication and needs to be more exhaustive. The same applies to any information provided verbally by telephone to any prospective or existing customer

TensorGrip L72 Spray Glue Overall

With its superior bond strength and versatility, the TensorGrip L72 Spray Glue is the go-to adhesive for professionals and DIY enthusiasts. Whether you’re working on small-scale projects or tackling larger, more complex undertakings, this spray glue delivers exceptional results every time.

Choose the TensorGrip L72 Spray Glue and experience the perfect balance between reliability, convenience, and exceptional performance. Get your hands on this outstanding adhesive solution today and unlock a world of possibilities for your projects.

Not sure if this spray adhesive is right for you?

If you are not sure this contact adhesive tape is right for your individual requirements, please do not hesitate to Contact our friendly sales team. We will be happy to help you.

Do you require a Certificate of Conformance and traceability?

If you require a Certificate of Conformance, please contact us after ordering (either by phone or email) and we will get this sent out to you with your order.