Flexi Spray GF248 is a High Heat Trim Spray Adhesive / Glue Can, which this variation comes in 500ml cans. The Flexi trim spray is ideal as a trimming adhesive that is fast drying. Flexi Spray GF248 offers users industrial grade, web spray contact adhesive with excellent grab whilst boasting temperature resistance of up to 120°C. Bulk rates up to 120 glue cans are available online; however, if you require Pallet Rates, please contact our dedicated sales team.
Application uses
This spray glue is suitable for many applications around trim fixing such as:
- Vehicle Interior Trimming
- High Heat require applications
- Carpet adhesive
- Headlining adhesive
- Fabric adhesive
- Leather adhesive
- Seat adhesive
- Trim spray
- Trim fix
- Joining industry
- Upholstery industry
- Transportation industry
- Automotive industry
Colour
This spray glue is clear in colour.
Flash off
This spray adhesive has a 2 – 5-minute flash off time.
Coverage information for this spray glue
This contact adhesive can cover an area up to 4M2.
Glue consistency
This consistency of this contact adhesive is web like.
Save when you buy in bulk
We offer bulk buying options with this sprayable glue. So, the more you buy, the more you save.
Technical information
| Property | Value |
|---|---|
| Colour | Clear |
| System Flammability | Flammable adhesive in flammable propellant |
| Coverage | 4M2 |
| Dry Time | 2 – 5 minutes |
| Shelf life | 18 months |
| Temperature Resistance | Up to 120°C |
Handling & Storage Information
- Consult Material Safety Data Sheet prior to use
- DO NOT store at temperatures over 50°C
- Avoid exposure to direct sunlight
- DO NOT store directly on a concrete floor
- For optimum performance, store at 18°C during use; but, it must always be above 10°C
- Always test product to determine suitability for your particular application prior to use in production
How to use this contact spray adhesive
This glue is designed to be applied to two surfaces to be bonded together. Consequently, for best results, the temperature of the adhesive and the surfaces being bonded should be between 60°F – 80°F (16°C – 27°C).
Use with adequate ventilation, and when possible, we recommend shaking the canister well before using.
Prior to use, please check compatibility by spraying a small test patch of the adhesive on the substrate, and this glue may degrade some substrates.
Spraying recommendations
- Make sure that surfaces are clean, dry and free from dirt, dust, oil, loose paint, wax or grease, etc…
- Spray about 10-20 cm (4″ – 8″) away at a 90° angle to the surface, applying a uniform, even coat of adhesive to obtain 80% to 100% coverage of the surface. If necessary, spray another coat of this adhesive in areas that appear to need more adhesive.
- Spray both surfaces to be bonded, one surface vertically and the other surface horizontally
- Allow 2 – 3 minutes for the adhesive to tack off until no adhesive transfers to the knuckle when touched.
- Adhere surfaces and press together with adequate pressure.
- Roller is recommended to apply a uniform pressure to achieve maximum strength.
- Allow 24 hours for the adhesive to fully cure.
- If the spray tip clogs, unscrew the spray tip from the can and clean with solvent such as lacquer thinner or acetone. Do not use a pin on the spray tip orifice
Disclaimer
All the information is based on practical experience and is published in good faith. However, because we have no control over the manner or conditions in which our products are used, or overwork undertaken, we cannot accept liability for results.
Responsibility for ascertaining the suitability of products for his purpose’s rests with the purchaser.
All conditions, representations, statements, warranties or guarantees whatsoever, whether express, implied or statutory, in respect of any goods manufactured, sold or supplied by us are hereby expressly excluded and we accept no liability in respect of any claim for damage or consequential loss caused to any property arising directly or indirectly out of the use of our products or goods.
Not sure if this spray adhesive is right for you?
If you are not sure if this contact adhesive is right for your individual requirements, please do not hesitate to Contact our friendly sales team and we will be happy to help you.
Do you require a Certificate of Conformance and traceability?
If you require a Certificate of Conformance, please contact us after ordering (either by phone or email) and we will get this sent out to you with your order.
Glenn Smith (verified owner) –
5 Star on service and the product