When it comes to creating a high gloss finish on laminate surfaces, using the right adhesive is crucial. That’s where HGL100 High Gloss Laminate Adhesive comes in. This specially formulated adhesive is designed to create a strong and durable bond between high gloss laminates and various substrates.
What is HGL100 High Gloss Laminate Adhesive?
HGL100 is a solvent-free, polyurethane adhesive that is specifically designed for use with high gloss laminate sheets. The adhesive has a unique formula that creates a strong and durable bond, ensuring that the laminate stays firmly attached to the substrate.
What are the benefits of using HGL100 High Gloss Laminate Adhesive?
One of the main benefits of using HGL100 is its ability to create a high gloss finish on laminate surfaces. The adhesive is specially formulated to ensure that the laminate stays in place, with no bubbles or wrinkles, resulting in a smooth and glossy surface.
Strong and Durable
HGL100 is also incredibly strong and durable. Once applied, the adhesive creates a bond that can withstand a wide range of stresses, including moisture, heat, and impact. This makes it ideal for use in high-traffic areas, such as commercial spaces and busy homes.
Versatile
Another benefit of HGL100 is its versatility. The adhesive can be used with a wide range of substrates, including wood, MDF, and particleboard, as well as other laminates. This makes it an excellent choice for a range of applications, from kitchen countertops to retail displays.
Can HGL100 be used in high-traffic areas?
Yes, HGL100 is ideal for use in high-traffic areas, such as commercial spaces and busy homes, due to its strong and durable bond.
How long does HGL100 take to set?
The setting time for HGL100 will depend on various factors, such as temperature and humidity. However, on average, HGL100 will take 2 minutes to start skinning over.
Is HGL100 water-resistant?
Yes, HGL100 is water-resistant and can withstand moisture without losing its bond strength.
Is HGL100 suitable for outdoor use?
No, HGL100 is not suitable for outdoor use, as it may break down over time when exposed to UV light.
Can HGL100 be sanded or painted over?
Yes, HGL100 can be sanded or painted over once it has fully cured. However, it is important to wait until the adhesive has fully cured before sanding or painting.
Can HGL100 be used on curved surfaces?
HGL100 is designed for use on flat surfaces, and it may be challenging to use it on curved surfaces. It is best to consult with the manufacturer or a professional if you plan to use HGL100 on curved surfaces.
What is the shelf life of HGL100?
The shelf life of HGL100 will depend on storage conditions. When stored in a cool, dry place, the adhesive can have a shelf life of up to 12 months. Be sure to check the expiration date before use.
What is HGL100 High Gloss Laminate Adhesive used for?
HGL100 High Gloss Laminate Adhesive is specifically designed for use with high gloss laminate sheets to create a strong and durable bond between the laminate and various substrates.
What surfaces can HGL100 be used on?
HGL100 can be used on a wide range of substrates, including wood, MDF, and particleboard, as well as other laminates.
Is HGL100 flammable?
No, HGL100 is non-flammable, making it safe to use in any environment.
Is HGL100 easy to use?
Yes, HGL100 is easy to use. Simply mix the two components together, apply the adhesive evenly to the surface, position the laminate, and trim the edges.
Can HGL100 withstand moisture, heat, and impact?
Yes, HGL100 is incredibly strong and durable, making it able to withstand a wide range of stresses, including moisture, heat, and impact.
Is HGL100 available in different colours?
Yes, HGL100 is available in two colors – clear and white – allowing it to be used with a wide range of laminate colours and patterns.
How do I clean up any excess adhesive?
Any excess adhesive can be removed using a suitable solvent, such as acetone or mineral spirits. Be sure to follow the manufacturer’s instructions carefully when using solvents.
How to use HGL100 High Gloss Laminate Adhesive?
Using HGL100 is a straightforward process. Here are the basic steps:
Prepare the surface
The surface that the laminate will be bonded to should be clean, dry, and free from any dust, grease, or other contaminants. If necessary, sand or plane the surface to create a smooth and even finish.
Apply the adhesive
Use a trowel or roller to apply the adhesive evenly to the surface. Be sure to apply enough adhesive to create a strong bond, but not so much that it squeezes out from under the laminate.
Apply the laminate
Carefully position the laminate over the adhesive and press down firmly, working from the center outwards to ensure that there are no bubbles or wrinkles.
Trim the edges
Use a router or sharp knife to trim the edges of the laminate, leaving a clean and neat finish.
Clean up
Any excess adhesive can be removed using a suitable solvent, such as acetone or mineral spirits. Be sure to follow the manufacturer’s instructions carefully when using solvents.
Use in a well ventilated area
- Surfaces should be clean. dry and free from grease. oil and dust. Excessive dust will impair performance.
- Attach a suitable spray nozzle to the spray gun.
- Connect the hose to the canister and the spray gun to the hose and tighten the connections.
- Open the valve on the canister. The valve should remain open until the canister is used up. Use the locking nut on the gun a er use. Turning off the valve will result in the adhesive drying in the hose and gun causing blockages.
- Hold the spray gun at 90° to the surface and apply a uniform coat of adhesive. to both substrates. ensuring 80-100% coverage. Spray one surface vertically the other horizontally. Pay particular attention to the edges. Porous substrates may require two applications.
- It is important to remember that Tuskbond HGL100 is a contact adhesive and forms a bond by sticking to itself. so there must be sufficient adhesive on both surfaces for this to happen.
- Allow the adhesive to tack up and protect from contamination whilst this happens. The adhesive is ready to bond when it feels dry to the touch and does not transfer.
Limitations
- Drying takes approximately 2 minutes depending on substrates. ambient temperature and humidity. Over spraying and pooling of the adhesive will increase the drying time and may cause the adhesive to show through the laminate
- Once the two surfaces have been brought together. an aggressive bond will be made. Spacers can be used to ensure the surfaces do not come into contact prematurely.
- Apply a uniform pressure over the work piece. starting in the middle and working outwards. Use blocks or a 3 inch roller and ensure the whole piece has been worked to ensure adequate contact of the adhesive.
- Please note that testing at this point by li ing the edge will weaken the bond. A nip roller will give the best results.
- Once assembled. the piece can be machined or trimmed as required.
- Full cure will take 24 hours.
- After spraying. remove the spray gun tip and rinse with a suitable solvent cleaner before it has cured.
Drying time
Tuskbond HGL100 dries within two minutes under normal conditions, but this will vary under different temperatures and humidities. High humidity and low temperatures will slow the drying time and if the temperature gets very low, can produce bloom. Bloom is moisture which forms on the glue line caused by solvent evaporation lowering the air temperature above it.
High Gloss Laminate Adhesive Overall
In conclusion, HGL100 High Gloss Laminate Adhesive is an excellent choice for anyone looking to create a high gloss finish on laminate surfaces. With its strong and durable bond, versatility, and ease of use, it is an ideal solution for a wide range of applications. Whether you are renovating your kitchen, creating a retail display, or working on a DIY project, HGL100 is sure to deliver excellent results.
Do you require a Certificate of Conformance and traceability?
If you require a Certificate of Conformance, please contact us after ordering (either by phone or email) and we will get this sent out to you with your order.
Reviews
There are no reviews yet