PSA7004, is a: 12mm x 4mm x 20 Metre High Performance Security Glazing Tape which is a are closed cell Polyolefin foam tape – with a unique differential adhesive system. This adhesive system is specifically designed for window – UPVC and other variations – and door glazing applications.
The exposed side of this high performance glazing tape adhesive, is specifically designed for adhesion to PVC and other low surface energy sash and frame materials.
The liner side adhesive is specifically designed for adhesion to glass and the surface specific adhesive provide optimum performance, weather resistance, and durability.
Construction information
Liner information
The High Performance Security Glazing Tape, has a filmic release liner. This liner is ideal for easy non tear removal during difficult applications.
Features information
- Optimum compatibility and performance with: PVC, aluminium, wood, and other window and door systems
- High density foam – provides: excellent structural, sealant, and durability properties
- Differential Adhesive system – provides: optimum surface compatibility improving security
- Immediate bond – eliminates: production, handling, and shipping delays
- Dimensional stability – eliminates: sealant flow, pump out and clean out
- Exceeds A.A.M.A Specification #810.1-92. Type 1 for Cellular Glazing Tapes
Surface preparation information
This glazing tape must be applied to surfaces that are: clean, dry and flat. A 50/50 mixture of isopropyl alcohol/water and a clean rag are recommended for moderate cleaning requirements. A stronger solvent, such as: high flash naphtha, may be required to clean oils and other contaminants.
Change any cleaning rags often and allow surface to dry prior to application.
Surface preparation is paramount for achieving the required bond when using this pressure sensitive adhesive. Read our Surface Preparation and Application Guide for more information.
Application information
This glazing tape must be applied to surfaces that are: clean, dry and flat. Position this tape on glazing leg so that the tape edge is aligned flush with the sight line.
Initial adhesion is obtained by applying firm, uniform pressure to the tape during application, prior to liner removal.
The tape should be knife cut and butted closely together at corners without overlapping, and a bead of an approved sealant may be applied at the butt joint after liner removal.
After application, the liner should not be removed until glass is ready for placement; avoid any unnecessary adhesive exposure.
This glazing tape, should be compressed a minimum of 10% for optimum adhesive performance and to provide an effective weather seal.
Structural glazing beads and stops are recommended, and windows and doors should be stored in a position where the weight of the glass is on the tape.
Setting blocks are recommended for all window and door systems.
Recommended application temperature Information
The recommended temperature for this tape is: 60°F to 100°F (16°C to 38°C).
Compatibility information
This adhesive glazing tape is compatible with most quality glazing sealants and components, and it is the user’s responsibility to determine overall compatibility. If you are not sure please contact us.
Storage information
This glazing tape should be stored indoors at 60°F to 85°F (16°C to 38°C), 45% to 55% relative humidity.
Shelf life under these conditions is one year.
For improved initial adhesion in cold temperatures, store this tape and sash/frame materials in recommended conditions until application.
Additional information
Due to the variety of window and door designs, applications, and performance requirements, PSA Solutions Ltd, recommends testing this product for specific requirements prior to use.
Technical information
| Test | Typical Value | Test Method |
|---|---|---|
| Product thickness | 35.8 mils | PSTC-133 |
| Peel adhesion – EXP | 90 oz/inch | PSTC-101 |
| Peel adhesion – LNR | 60 oz/inch | PSTC-101 |
| Shear adhesion | >24 hours @ 2.2 psi | PSTC-107 |
| Tensile | 5 lbs/inch | PSTC-131 |
| Elongation | 400% | PSTC-131 |
| Service temperature | 0°F to 150°F |
Do you require a Certificate of Conformance and traceability?
If you require a Certificate of Conformance, please contact us after ordering (either by phone or email) and we will get this sent out to you with your order.
Reviews
There are no reviews yet