Our PSAB2003 Bondloc Plastic Epoxy Putty Stick is a hand kneadable, specialty Epoxy Putty that mixes in one minute to provide fast, permanent repairs to most plastic surfaces.
When applying to surfaces it is necessary to work the material forcefully into the surface and apply pressure until adhesion begins to take effect, please note: the lower the temperature the longer it takes to cure.
This epoxy comes in a handy rod form with the curing agent encapsulated in the contrasting colour base material, and its putty-like consistency eliminates drips and runs, providing no mess application with no tools required to use.
The mixed epoxy turns from an aquamarine colour to fibreglass white upon curing and will not yellow upon exposure to UV light. After final cure, this adhesive may be drilled, sawed, tapped, filed, sanded and painted. It also allows patching in areas where welding is impossible.
Applications
This plastic epoxy stick after proper mixing, moulds like clay and may be used to permanently patch dents, scratches, cuts, gouges and holes in fibreglass, Bumper Plastic, White Goods, such as Typewriter, Fax Housings and all types of repairs to mouldings and injection type shapes.
It is ideal for making emergency repairs, and the unused portion will remain stable for years if protected from direct contact with the air, and in cool conditions.
Instructions for use
In order to achieve optimum adhesion, the surface you are applying this epoxy to should be cleaned free of grease or dirt. Scuffing or sanding the surface prior to cleaning will also help to ensure a good bond.
Pinch off the required quantity of putty, and then knead the inner and outer layer together thoroughly until one consistent colour shade is achieved.
Technical information
| Property | Value |
|---|---|
| Resin | Epoxide Light Blue |
| Chemical resistance | Hydrocarbons, Ketones, esters, halo-carbons, alcohols, aqueous salt solutions, dilute acids and bases |
| Electrical resistance | 30,000 mega Ohms |
| Dielectric strength (steel) | 300 Volts/mil |
| Shrinkage | <1% |
| Non-volatile content | 100% |
Cured performance
| Property | Value |
|---|---|
| Initial cure | 1 hour |
| Full cure time | 24 hours |
| Lap shear strength (steel) | 4.8 N/mm(2) |
| Shore D Hardness | 75 |
| Shrinkage | <1% |
| Compressive strength | 84N/mm(2) – 12,000 psi |
Health & Safety Information
This adhesive contains epoxy resin and may cause skin irritation in sensitive individuals. Unnecessary skin contact should therefore be avoided. If skin contact occurs, wash with a proprietary hand cleaner, followed by washing with soap and water.
In case of eye contact, flush with clean water for at least 15 minutes, and then seek medical attention. When fully cured, the product can be considered non-toxic. Always keep this adhesive away from foodstuffs and food utensils.
Storage information
Store in cool conditions, preferably away from direct sunlight or excessive heat. Shelf life at least 24 months @ 24C.
Not sure if this plastic epoxy is right for you?
If you are not sure if this adhesive is right for your individual requirements please do not hesitate to Contact our friendly sales team and we will be happy to help you.
Do you require a Certificate of Conformance and traceability?
If you require a Certificate of Conformance, please contact us after ordering (either by phone or email) and we will get this sent out to you with your order.
Reviews
There are no reviews yet