DuploCOLL 31300 IS is an industry recognised single sided Polyimide tape using a very high temperature resistant silicone adhesive system. This product is designed for very demanding electrical insulation and masking applications.
Ideal for the following applications
Electrical Insulation
Surface Protection
Barrier (Temperature)
Reflow Soldering
PCB Masking
Highly Visable Colour
The obvious amber colour of the polyimide tape allows you to identify when you are drifting off the boundary area as you apply it.
Carrier information
The carrier on this tape is a 0.065mm polyimide film.
Adhesive information
This tape adhesive is a high-temperature-resistant silicone adhesive
Surface Preparation Information
This masking tape should be ideally applied between +15°C and +30°C, and the surface must be clean and free from dust and grease.
This pressure-sensitive adhesive tape must be applied with pressure in order to achieve maximum hold, and the indicated level of performance will be reached after a bonding period of 24 hours.
Storage and self life information
Tape should be ideally kept in a clean, dry and well-ventilated area – preferably at room temperature between 18°C and 35°C.
Stored under these conditions, the shelf life of this tape will be a minimum of 1 year.
Technical Description
| Technical description | Technical value |
|---|---|
| Adhesion to steel | 7 N/25mm |
| Dynamic Sheer | 140N/625 mm |
| Temperature resistance (Long term) | 180°C |
| Temperature resistance (Short term) | 180°C |
Specific Technical Data
Electric Surface Resistance: 2E+13 ohms/sq
Electrical Volume Resistance: 1E+14 ohms/cm
Dielectric Strength AC: 5kV
Relative Dielectric Strength AC: 140kV/mm
Dielectric Strength DC: 8kV
Relative Dielectric Strength DC: 200kV/mm
Temperature Range: -40C to +180C
We stock the following sizes
We stock the following types and sizes of these fine-line tapes.
- 6mm x 33Mtr
- 9mm x 33Mtr
- 12mm x 33Mtr
- 19mm x 33Mtr
- 25mm x 33Mtr
- 50mm x 33Mtr
- 8mm Die-cut Dots
- 10mm Die-cut Dots
- 12mm Die-cut Dots
- This product is converted in house so please enquire if you require alternative widths
Is this masking tape correct for your requirements, or does it require the Material Safety Data Sheet?
If you require the Material Safety Data Sheet (MSDS) or technical data sheet for this tape please see attachments at the bottom of the page, or if you are not sure if they are right for your requirements, please do not hesitate to contact us and we will be happy to advise you on your options.
Preparation advice
Surface preparation is paramount for achieving the required bond when using this pressure sensitive adhesive. Read our Surface Preparation and Application Guide for more information.
Who are Pressure Sensitive Adhesive Solutions?
PSA Solutions Ltd is a masking tape supplier based in Leicestershire, UK.
We have a large range of fine line masking tapes in our Leicester warehouse, ready to be dispatched – normally – within 1-3 days.
So if you can not see the adhesive you are looking for contact our friendly sales team for free advice.
Do you require a Certificate of Conformance and traceability?
If you require a Certificate of Conformance, please contact us after ordering (either by phone or email) and we will get this sent out to you with your order.
Reviews
There are no reviews yet