PSA10B, is an: open cellular polyurethane foam, with no plasticizers, impregnated with a modified flame retardant acrylic dispersion. One side of this foam tape has a strong acrylic self-adhesive – for locating purposes.
This tape will expand from 10mm – its original thickness – to 50mm.
Made from Polyurethane
As this: expansion foam tape, is made from: Polyurethane, it has several distinct advantages over similar tapes made from other inferior materials. These advantages are:
- Abrasion resistant
- Oil and solvent resistant
- Higher load bearing capacity than conventional rubber
- Higher Tear resistant than rubber – between 500-100 Ibs./linear inch
- Weather resistant
- Excellent noise dampening properties
- Electrical insulating properties
- Heat and cold resistant
Application uses for Expanding Foam Tape
- Installation of window & door frames, and supporting structures
- Sealing between concrete or roof elements
- Sealing of: ceiling / sky / roof lights
- In log houses
- Brick and block work
- Partitions
- Precast concrete panels
- Conservatory hip / ridge lines and sectional buildings
- Noise & vibration insulation around ventilation and air exchange devices
- Automotive industry
- Used in the manufacture of mobile and recreational homes
- Where high demands on joint constructions are required – this has exceptional properties in this area
This tape’s use within the modern building industry
This sealing tape has a very wide range of applications within a modern building – where today’s demands on reliable sealing solutions have significantly increased over the past few years.
Sealing and waterproofing joints
Due to its fine qualities, this expansion foam tape has a self-expanding PU foam sealant with open pores. Along with this, this self-expanding sealant makes it suitable for: sealing and making joints extra weatherproof, while allowing the joints to breathe and the moisture to vaporize whilst maintaining elasticity.
Expands after opening
Plasticizer free, and impregnated with modified acrylic dispersion and added fire preventing fillers. This sealing tape has a strong acrylic self-adhering tape along one side, and after opening the sealant expands slowly in air and fills uneven surfaces.
Minimises the risk of mould, fenestration and prevents: dry rot and fungal growth in building structures
It is also: Ultra Violet (UV), wind and rain resistant. These features minimise the risk of mould in building structures, and is used to resist weather ingress in fenestration; while preventing dry rot and fungal growth on adjacent building materials.
Used in the manufacture of mobile and recreational homes
Increasingly used in the manufacture of mobile and recreational homes where insulation against noise and vibration are of utmost consideration.
Technical Information
| Property | Value |
|---|---|
| Density | Approx. 120g/m3 (�10%) |
| Colour | Black |
| Supplied in | Rolls pre-compressed to approximately 15-20% of original thickness |
| Compression resistance | Approximately 5.0 kPa |
| Tensile strength | Approximately 170 Pa |
| Elongation | Approximately 170% |
| Temperature range | – 40 – + 100�C shortly to +130�C DIN 1748-2 |
| Acceptance to other building materials | Extremely good DIN 52452 |
| Fire resistance | PASS B1 DIN 4102 |
| Water penetration (600 Pascal’s) | PASS EN 86 |
| Water vapour resistance | <100� DIN 52615 |
| Thermal Conductivity | <0.1w/m2 DIN 52612 |
| Air Penetration | <0.1m3/h/m/(10Pa)2/3 |
| Resistance to ageing | PASS DIN 53387 |
| Storage time | 1 year (in ambient temperature) |
| Mounting temperature | +5�C to +30�C |
| Storage temperature | +10�C to +20�C |
| Life expectancy | 25 years |
Not sure if this: Foam Tape, is correct for your requirements or require the Material Safety Data Sheet?
If you require the Material Safety Data Sheet (MSDS) for this foam tape, or if you are not sure if they are right for your requirements, please do not hesitate to contact us and we will be happy to send it to you and advise you on your options.
Hazard information
No hazard warning required. This product is not regarded as having any significant associated hazards
Fire fighting measures
There is no restriction on the extinguishing media used; however, please be aware that burning of this tape produces dense acid fumes and smoke which are hazardous to health.
Handling and storage information
Store in a cool dry place, in its original packaging.
Personal protection
No special measures are required; however, the use of gloves is recommended for people who have a sensitive nature.
Stability and reactivity information
Stability and Reactivity: Stable and unreactive during normal handling and use; however, please avoid contact with strong oxidising agents.
Hazardous Decomposition Products: Carbon Monoxide, Amines, Cyanides.
Preparation advice
Surface preparation is paramount for achieving the required bond when using this pressure sensitive adhesive. Read our Surface Preparation and Application Guide for more information.
Do you require a Certificate of Conformance and traceability?
If you require a Certificate of Conformance, please contact us after ordering (either by phone or email) and we will get this sent out to you with your order.
Reviews
There are no reviews yet